Materials, data and limits
Casing | Stainless steel AISI 316L, wetted parts: electropolished Ra<0.8 |
Impeller | Stainless steel AISI 316L electropolished Ra<0.8 |
Mechanical seal | Single, SiC/carbon (std) or SiC/SiC, FDA approved Double, SiC/carbon (std) or SiC/SiC, FDA approved |
O-rings | EPDM, FKM, NBR (all FDA approved) |
Motor | IP55; IEC frame B35; PTC thermistor; IE3; 3-phase |
Pressure rating @ 20 °C |
PN10 – CTX 40-165, CTX 50-145, CTX 50-200, CTX 65-175 PN16 – CTX 65-230, CTX 65-240, CTX 80-205, CTX 80-212, CTX 80-260, CTX 100-230 |
Liquid temp. | -10 °C ... +120 °C (140 °C for short periods during SiP) |
Ambient temp. | -20 °C ... +40 °C |
Viscosity | max ~150 cSt |
Built-on frequency inverter
This is easiest and most flexible way of changing pump working parameters.
In addition, the pump and motor are protected from overloading and a soft-start function is included.
Hygienic shroud
The hygienic motor shroud in AISI 304L protects the motor against flooding, deposition of dirt, from spraying water during pump cleaning procedure.Adjustable feet
The solution allows easy cleaning of the surface underneath the pump. It can also prove useful when there is a need to move the pump to a different location.
Casing drainage
The drain connection at the bottom of the pump casing allows to fully drain the pumped liquid from the casing.
Connection dimensions
Model | DIN 11851 thread (std.) | DIN 32676 clamp | SMS3017 clamp | SMS 1145 thread | RJT thread | |||||
Inlet | Outlet | Inlet | Outlet | Inlet | Outlet | Inlet | Outlet | Inlet | Outlet | |
CTX 40-165 | DN40 | DN32 | DN40 | DN32 | 38 | 33.7 | 38 | 32 | 1.5” | 1.25” |
CTX 50-145 | DN50 | DN40 | DN50 | DN40 | 51 | 38 | 51 | 38 | 2” | 1.5” |
CTX 50-200 | DN50 | DN40 | DN50 | DN40 | 51 | 38 | 51 | 38 | 2” | 1.5” |
CTX 65-175 | DN65 | DN50 | DN65 | DN50 | 63.5 | 51 | 63.5 | 51 | 2.5” | 2” |
CTX 65-230 | DN65 | DN50 | DN65 | DN50 | 63.5 | 51 | 63.5 | 51 | 2.5” | 2” |
CTX 65-240 | DN65 | DN40 | DN65 | DN40 | 63.5 | 38 | 63.5 | 38 | 2.5” | 1.5” |
CTX 80-205 | DN80 | DN50 | DN80 | DN50 | 76.1 | 51 | 76 | 51 | 3” | 2” |
CTX 80-212 | DN80 | DN65 | DN80 | DN65 | 76.1 | 63.5 | 76 | 63.5 | 3” | 2.5” |
CTX 80-260 | DN80 | DN65 | DN80 | DN65 | 76.1 | 63.5 | 76 | 63.5 | 3” | 2.5” |
CTX 100-230 | DN100 | DN80 | DN100 | DN80 | 101.6 | 76.1 | 101.6 | 76 | 4” | 3” |