Contact

Uncategorised

Technical data

Model	Max capacity (l/min)	Connections BSP inv.
TXK25	26	1/2"
TXK70	78	3/4"
TXK120	158	1"
TXK220	330	1 1/2"
TXK420	570	2"

If you are looking for an effective way to eliminate pressure variations on the pump discharge and you have limited space in your installation, the built-on dampener is an ideal solution. It provides all the advantages of using a standard Tapflo DT dampener but is a compact solution.

The dampener housing is also the pump manifold so you do not have to worry about connecting the dampener to the pump. This solution does not affect the pump flow or the dampening effect.

The Tapflo pump with a built-on dampener combines the advantages of our standard pumps with the active pulsation dampener in a compact manner.

Specifications

Max flow (Q): 570 l/min
Max pressure (H): 8 bar
Material: Aluminium
ATEX

Features & Benefits

Compact. Ready to use integrated set of Tapflo AOOD pump and DT pulsation dampener. No piping or additional connections is required
In Line. Pump outlet is at the same time dampener outlet
Better dampening. DT pulsation dampener is fully inline, to obtain best possible dampening effect
Dedicated. For each pump size same size of Pulsation Dampener is used
Convertible. Built on Dampener can be implemented in already existing pumps, just by replacing pump outlet with DTK pulsation dampener

BROCHURES & MANUALS

CONTACT FORM

Thank you for your message! We will contact you soon.

Meanwhile, check out our products or go to the home page.

TECHNICAL DETAILS PUMPS

Design pressure:	PN6
Design standard:	(BG5)
Max. system pressure:	1.5 Bar with standard seal, 6 bar optional
Min. flow:	1 m3/h
Max. Flow:	50 m3/h
Max. head:	45 m (60 Hz)
Max. viscosity:	250 mPas
Max. solid size:	2 mm

TECHNICAL DETAILS MOTORS

Standard:	Three-phase, multivoltage, TEFC
High efficiency:	IE2 efficiency level acc. IEC60034-30
Continuous duty:	S1
Multi Voltage up to IEC100:	220-240/380-415V 50Hz // 440-460 V 60 Hz
Multi Voltage above IEC100:	380-415V/660V 50Hz // 440-460 V 60 Hz
Protection class:	IP55 (IEC 34-5/ NEN-EN 60034-5)
Insulation Class:	„F” (D T=80 C)
Max. ambient temperature:	-30 to 40 oC, at 1000 m.a.s.l
Max. relative humidity:	< 95%

OPTIONAL AVAILABLE

Other voltages:	f.i. 480 V/3Ph/60 Hz
Other insulation:	f.i. Tropicalized
PTC Thermistors:	on windings
Water and/or dust protection:	IP56, IP65, IP66, IPW56, IPW65 or IPW66

COMPACT SERIES SEALPRO MODEL KR UP TO 50 M3/H

This series is close-coupled. The pump is mounted directly to the motor flange by means of a plastic bracket. This compact execution is perfectly suited as stationary centrifugal pump or for use in machines.

APPLICATIONS

For all transport or circulation duties of corrosive liquids, even high viscosity, with maximum efficiency.

This series of pumps is equipped with a state of the art semi-open impeller with pressure release.

It is fixed onto the shaft independent from the direction of rotation.

MATERIALS

Standard is the material PPH that covers a very wide range of duties.

For highly abrasive liquids (high % of solids), at special order, impellers or housing parts of High modulus HMPE are available.

For highly corrosive mixtures at higher temperatures even a pump housing entirely made of virgin PTFE is available.

BROCHURES & MANUALS

CONTACT FORM

Tapflo Code of Conduct

Tapflo Gift Benefits and Hospitality Guidelines

Tapflo Whistleblower Policy

Tapflo Environmental Policy

Tapflo Group Sustainability Policy

Air operated diaphragm pumps

View Product

Pulsation dampeners

The active pulsation dampener is the most efficient way to remove pressure variations on the discharge of the pump.

| PE & PTFE dampeners | Metal dampeners
| Sanitary dampeners | Accessories

View Product

Filter press pumps

| AODD Filter Press pumps
| Steinle Filter Press pumps

View Product

Centrifugal pumps

View Product

Hose pumps

Effective hose pump solutions for difficult, abrasive, corrosive and viscous liquids with particles. Innovative & reliable high pressure hose pumps.
| PT series | PTL series
| CleanPRO | Accessories

View Product

Submersible pumps

Tapflo submersible pumps are designed for an extensive range of applications. We offer pumps for drainage of flat surfaces, sewages, dewatering of spring, rain and ground water as well as slurries and sludges containing particles.

View Product

Rotary Lobe pumps

Pumps contain few cavities, which reduces the risk of bacterial growth and makes them particularly suitable for the transport of sensitive fluids – from glue to whole strawberries.

View Product

Lobe pumps

LPX series pumps are hygienic rotary lobe pumps characterized by low shear forces and gentle pumping of both high and low viscosity products. The pumps in this series provide reliable performance with low noise, robust and gentle fluid transfer.

View Product

Dosing pumps

The pumps are of very high quality and has a functional and appealing design. Simple handling, the ability to rotate the pump housing, a unique venting system as well as a functional and appealing design.

View Product

Sanitary Screw pump

Our Screw Pump is Self Priming and has been produced specifically for hygienic and sanitary applications within the food, chemical and pharmaceutical industries..

View Product

Progressive Cavity pumps

The pump provides almost a pulsation-free flow, can handle high pressures and is at the same time very gentle on the liquid and its contents with excellent suction capabilities.

View Product

Industrial mixers

IBC containers and standard drums are commonly used in industry. Applying them is the easiest way to store and transport various liquids. As many of those liquids must be mixed before being used in the process, we offer a range of dedicated Industrial Mixers.

View Product

Hygienic valves

Hygienic valves are high-quality components made of forged 304L and 316L stainless steel. They are serialized for full traceability, TÜV NORD ISO 9001: 2015 approved.

View Product